Config file and command line options#
The Jupyter Server can be run with a variety of command line arguments. A list of available options can be found below in the options section.
Defaults for these options can also be set by creating a file named
jupyter_server_config.py
in your Jupyter folder. The Jupyter
folder is in your home directory, ~/.jupyter
.
To create a jupyter_server_config.py
file, with all the defaults
commented out, you can use the following command line:
$ jupyter server --generate-config
Options#
This list of options can be generated by running the following and hitting enter:
$ jupyter server --help-all
- Application.log_datefmtUnicode
Default:
'%Y-%m-%d %H:%M:%S'
The date format used by logging formatters for %(asctime)s
- Application.log_formatUnicode
Default:
'[%(name)s]%(highlevel)s %(message)s'
The Logging format template
- Application.log_levelany of
0``|``10``|``20``|``30``|``40``|``50``|
’DEBUG’|
’INFO’|
’WARN’|
’ERROR’|
’CRITICAL’`` Default:
30
Set the log level by value or name.
- Application.logging_configDict
Default:
{}
Configure additional log handlers.
The default stderr logs handler is configured by the log_level, log_datefmt and log_format settings.
This configuration can be used to configure additional handlers (e.g. to output the log to a file) or for finer control over the default handlers.
If provided this should be a logging configuration dictionary, for more information see: https://docs.python.org/3/library/logging.config.html#logging-config-dictschema
This dictionary is merged with the base logging configuration which defines the following:
A logging formatter intended for interactive use called
console
.A logging handler that writes to stderr called
console
which uses the formatterconsole
.A logger with the name of this application set to
DEBUG
level.
This example adds a new handler that writes to a file:
c.Application.logging_config = { "handlers": { "file": { "class": "logging.FileHandler", "level": "DEBUG", "filename": "<path/to/file>", } }, "loggers": { "<application-name>": { "level": "DEBUG", # NOTE: if you don't list the default "console" # handler here then it will be disabled "handlers": ["console", "file"], }, }, }
- Application.show_configBool
Default:
False
Instead of starting the Application, dump configuration to stdout
- Application.show_config_jsonBool
Default:
False
Instead of starting the Application, dump configuration to stdout (as JSON)
- JupyterApp.answer_yesBool
Default:
False
Answer yes to any prompts.
- JupyterApp.config_fileUnicode
Default:
''
Full path of a config file.
- JupyterApp.config_file_nameUnicode
Default:
''
Specify a config file to load.
- JupyterApp.generate_configBool
Default:
False
Generate default config file.
- JupyterApp.log_datefmtUnicode
Default:
'%Y-%m-%d %H:%M:%S'
The date format used by logging formatters for %(asctime)s
- JupyterApp.log_formatUnicode
Default:
'[%(name)s]%(highlevel)s %(message)s'
The Logging format template
- JupyterApp.log_levelany of
0``|``10``|``20``|``30``|``40``|``50``|
’DEBUG’|
’INFO’|
’WARN’|
’ERROR’|
’CRITICAL’`` Default:
30
Set the log level by value or name.
- JupyterApp.logging_configDict
Default:
{}
Configure additional log handlers.
The default stderr logs handler is configured by the log_level, log_datefmt and log_format settings.
This configuration can be used to configure additional handlers (e.g. to output the log to a file) or for finer control over the default handlers.
If provided this should be a logging configuration dictionary, for more information see: https://docs.python.org/3/library/logging.config.html#logging-config-dictschema
This dictionary is merged with the base logging configuration which defines the following:
A logging formatter intended for interactive use called
console
.A logging handler that writes to stderr called
console
which uses the formatterconsole
.A logger with the name of this application set to
DEBUG
level.
This example adds a new handler that writes to a file:
c.Application.logging_config = { "handlers": { "file": { "class": "logging.FileHandler", "level": "DEBUG", "filename": "<path/to/file>", } }, "loggers": { "<application-name>": { "level": "DEBUG", # NOTE: if you don't list the default "console" # handler here then it will be disabled "handlers": ["console", "file"], }, }, }
- JupyterApp.show_configBool
Default:
False
Instead of starting the Application, dump configuration to stdout
- JupyterApp.show_config_jsonBool
Default:
False
Instead of starting the Application, dump configuration to stdout (as JSON)
- ServerApp.allow_credentialsBool
Default:
False
Set the Access-Control-Allow-Credentials: true header
- ServerApp.allow_external_kernelsBool
Default:
False
Whether or not to allow external kernels, whose connection files are placed in external_connection_dir.
- ServerApp.allow_originUnicode
Default:
''
Set the Access-Control-Allow-Origin header
Use ‘*’ to allow any origin to access your server.
Takes precedence over allow_origin_pat.
- ServerApp.allow_origin_patUnicode
Default:
''
Use a regular expression for the Access-Control-Allow-Origin header
Requests from an origin matching the expression will get replies with:
Access-Control-Allow-Origin: origin
where
origin
is the origin of the request.Ignored if allow_origin is set.
- ServerApp.allow_password_changeBool
Default:
True
DEPRECATED in 2.0. Use PasswordIdentityProvider.allow_password_change
- ServerApp.allow_remote_accessBool
Default:
False
Allow requests where the Host header doesn’t point to a local server
By default, requests get a 403 forbidden response if the ‘Host’ header shows that the browser thinks it’s on a non-local domain. Setting this option to True disables this check.
This protects against ‘DNS rebinding’ attacks, where a remote web server serves you a page and then changes its DNS to send later requests to a local IP, bypassing same-origin checks.
Local IP addresses (such as 127.0.0.1 and ::1) are allowed as local, along with hostnames configured in local_hostnames.
- ServerApp.allow_rootBool
Default:
False
Whether to allow the user to run the server as root.
- ServerApp.allow_unauthenticated_accessBool
Default:
True
Allow unauthenticated access to endpoints without authentication rule.
When set to
True
(default in jupyter-server 2.0, subject to change in the future), any request to an endpoint without an authentication rule (either@tornado.web.authenticated
, or@allow_unauthenticated
) will be permitted, regardless of whether user has logged in or not.When set to
False
, logging in will be required for access to each endpoint, excluding the endpoints marked with@allow_unauthenticated
decorator.This option can be configured using
JUPYTER_SERVER_ALLOW_UNAUTHENTICATED_ACCESS
environment variable: any non-empty value other than “true” and “yes” will prevent unauthenticated access to endpoints without@allow_unauthenticated
.- ServerApp.answer_yesBool
Default:
False
Answer yes to any prompts.
- ServerApp.authenticate_prometheusBool
Default:
True
- “
Require authentication to access prometheus metrics.
- ServerApp.authorizer_classType
Default:
'jupyter_server.auth.authorizer.AllowAllAuthorizer'
The authorizer class to use.
- ServerApp.autoreloadBool
Default:
False
Reload the webapp when changes are made to any Python src files.
- ServerApp.base_urlUnicode
Default:
'/'
The base URL for the Jupyter server.
Leading and trailing slashes can be omitted, and will automatically be added.
- ServerApp.browserUnicode
Default:
''
- Specify what command to use to invoke a web
browser when starting the server. If not specified, the default browser will be determined by the
webbrowser
standard library module, which allows setting of the BROWSER environment variable to override it.
- ServerApp.certfileUnicode
Default:
''
The full path to an SSL/TLS certificate file.
- ServerApp.client_caUnicode
Default:
''
The full path to a certificate authority certificate for SSL/TLS client authentication.
- ServerApp.config_fileUnicode
Default:
''
Full path of a config file.
- ServerApp.config_file_nameUnicode
Default:
''
Specify a config file to load.
- ServerApp.config_manager_classType
Default:
'jupyter_server.services.config.manager.ConfigManager'
The config manager class to use
- ServerApp.contents_manager_classType
Default:
'jupyter_server.services.contents.largefilemanager.AsyncLarge...
The content manager class to use.
- ServerApp.cookie_optionsDict
Default:
{}
DEPRECATED. Use IdentityProvider.cookie_options
- ServerApp.cookie_secretBytes
Default:
b''
- The random bytes used to secure cookies.
By default this is generated on first start of the server and persisted across server sessions by writing the cookie secret into the
cookie_secret_file
file. When using an executable config file you can override this to be random at each server restart.Note: Cookie secrets should be kept private, do not share config files with cookie_secret stored in plaintext (you can read the value from a file).
- ServerApp.cookie_secret_fileUnicode
Default:
''
The file where the cookie secret is stored.
- ServerApp.custom_display_urlUnicode
Default:
''
Override URL shown to users.
Replace actual URL, including protocol, address, port and base URL, with the given value when displaying URL to the users. Do not change the actual connection URL. If authentication token is enabled, the token is added to the custom URL automatically.
This option is intended to be used when the URL to display to the user cannot be determined reliably by the Jupyter server (proxified or containerized setups for example).
- ServerApp.default_urlUnicode
Default:
'/'
The default URL to redirect to from
/
- ServerApp.disable_check_xsrfBool
Default:
False
Disable cross-site-request-forgery protection
Jupyter server includes protection from cross-site request forgeries, requiring API requests to either:
originate from pages served by this server (validated with XSRF cookie and token), or
authenticate with a token
Some anonymous compute resources still desire the ability to run code, completely without authentication. These services can disable all authentication and security checks, with the full knowledge of what that implies.
- ServerApp.external_connection_dirUnicode
Default:
None
The directory to look at for external kernel connection files, if allow_external_kernels is True. Defaults to Jupyter runtime_dir/external_kernels. Make sure that this directory is not filled with left-over connection files, that could result in unnecessary kernel manager creations.
- ServerApp.extra_servicesList
Default:
[]
handlers that should be loaded at higher priority than the default services
- ServerApp.extra_static_pathsList
Default:
[]
Extra paths to search for serving static files.
This allows adding javascript/css to be available from the Jupyter server machine, or overriding individual files in the IPython
- ServerApp.extra_template_pathsList
Default:
[]
Extra paths to search for serving jinja templates.
Can be used to override templates from jupyter_server.templates.
- ServerApp.file_to_runUnicode
Default:
''
Open the named file when the application is launched.
- ServerApp.file_url_prefixUnicode
Default:
'notebooks'
The URL prefix where files are opened directly.
- ServerApp.generate_configBool
Default:
False
Generate default config file.
- ServerApp.get_secure_cookie_kwargsDict
Default:
{}
DEPRECATED. Use IdentityProvider.get_secure_cookie_kwargs
- ServerApp.identity_provider_classType
Default:
'jupyter_server.auth.identity.PasswordIdentityProvider'
The identity provider class to use.
- ServerApp.iopub_data_rate_limitFloat
Default:
0.0
DEPRECATED. Use ZMQChannelsWebsocketConnection.iopub_data_rate_limit
- ServerApp.iopub_msg_rate_limitFloat
Default:
0.0
DEPRECATED. Use ZMQChannelsWebsocketConnection.iopub_msg_rate_limit
- ServerApp.ipUnicode
Default:
'localhost'
The IP address the Jupyter server will listen on.
- ServerApp.jinja_environment_optionsDict
Default:
{}
Supply extra arguments that will be passed to Jinja environment.
- ServerApp.jinja_template_varsDict
Default:
{}
Extra variables to supply to jinja templates when rendering.
- ServerApp.jpserver_extensionsDict
Default:
{}
Dict of Python modules to load as Jupyter server extensions.Entry values can be used to enable and disable the loading ofthe extensions. The extensions will be loaded in alphabetical order.
- ServerApp.kernel_manager_classType
Default:
'jupyter_server.services.kernels.kernelmanager.MappingKernelM...
The kernel manager class to use.
- ServerApp.kernel_spec_manager_classType
Default:
'builtins.object'
The kernel spec manager class to use. Should be a subclass of
jupyter_client.kernelspec.KernelSpecManager
.The Api of KernelSpecManager is provisional and might change without warning between this version of Jupyter and the next stable one.
- ServerApp.kernel_websocket_connection_classType
Default:
'jupyter_server.services.kernels.connection.base.BaseKernelWe...
The kernel websocket connection class to use.
- ServerApp.kernel_ws_protocolUnicode
Default:
''
DEPRECATED. Use ZMQChannelsWebsocketConnection.kernel_ws_protocol
- ServerApp.keyfileUnicode
Default:
''
The full path to a private key file for usage with SSL/TLS.
- ServerApp.limit_rateBool
Default:
False
DEPRECATED. Use ZMQChannelsWebsocketConnection.limit_rate
- ServerApp.local_hostnamesList
Default:
['localhost']
Hostnames to allow as local when allow_remote_access is False.
Local IP addresses (such as 127.0.0.1 and ::1) are automatically accepted as local as well.
- ServerApp.log_datefmtUnicode
Default:
'%Y-%m-%d %H:%M:%S'
The date format used by logging formatters for %(asctime)s
- ServerApp.log_formatUnicode
Default:
'[%(name)s]%(highlevel)s %(message)s'
The Logging format template
- ServerApp.log_levelany of
0``|``10``|``20``|``30``|``40``|``50``|
’DEBUG’|
’INFO’|
’WARN’|
’ERROR’|
’CRITICAL’`` Default:
30
Set the log level by value or name.
- ServerApp.logging_configDict
Default:
{}
Configure additional log handlers.
The default stderr logs handler is configured by the log_level, log_datefmt and log_format settings.
This configuration can be used to configure additional handlers (e.g. to output the log to a file) or for finer control over the default handlers.
If provided this should be a logging configuration dictionary, for more information see: https://docs.python.org/3/library/logging.config.html#logging-config-dictschema
This dictionary is merged with the base logging configuration which defines the following:
A logging formatter intended for interactive use called
console
.A logging handler that writes to stderr called
console
which uses the formatterconsole
.A logger with the name of this application set to
DEBUG
level.
This example adds a new handler that writes to a file:
c.Application.logging_config = { "handlers": { "file": { "class": "logging.FileHandler", "level": "DEBUG", "filename": "<path/to/file>", } }, "loggers": { "<application-name>": { "level": "DEBUG", # NOTE: if you don't list the default "console" # handler here then it will be disabled "handlers": ["console", "file"], }, }, }
- ServerApp.login_handler_classType
Default:
'jupyter_server.auth.login.LegacyLoginHandler'
The login handler class to use.
- ServerApp.logout_handler_classType
Default:
'jupyter_server.auth.logout.LogoutHandler'
The logout handler class to use.
- ServerApp.max_body_sizeInt
Default:
536870912
Sets the maximum allowed size of the client request body, specified in the Content-Length request header field. If the size in a request exceeds the configured value, a malformed HTTP message is returned to the client.
Note: max_body_size is applied even in streaming mode.
- ServerApp.max_buffer_sizeInt
Default:
536870912
Gets or sets the maximum amount of memory, in bytes, that is allocated for use by the buffer manager.
- ServerApp.min_open_files_limitInt
Default:
0
Gets or sets a lower bound on the open file handles process resource limit. This may need to be increased if you run into an OSError: [Errno 24] Too many open files. This is not applicable when running on Windows.
- ServerApp.notebook_dirUnicode
Default:
''
DEPRECATED, use root_dir.
- ServerApp.open_browserBool
Default:
False
- Whether to open in a browser after starting.
The specific browser used is platform dependent and determined by the python standard library
webbrowser
module, unless it is overridden using the –browser (ServerApp.browser) configuration option.
- ServerApp.passwordUnicode
Default:
''
DEPRECATED in 2.0. Use PasswordIdentityProvider.hashed_password
- ServerApp.password_requiredBool
Default:
False
DEPRECATED in 2.0. Use PasswordIdentityProvider.password_required
- ServerApp.portInt
Default:
0
The port the server will listen on (env: JUPYTER_PORT).
- ServerApp.port_retriesInt
Default:
50
The number of additional ports to try if the specified port is not available (env: JUPYTER_PORT_RETRIES).
- ServerApp.preferred_dirUnicode
Default:
''
Preferred starting directory to use for notebooks and kernels. ServerApp.preferred_dir is deprecated in jupyter-server 2.0. Use FileContentsManager.preferred_dir instead
- ServerApp.pylabUnicode
Default:
'disabled'
DISABLED: use %pylab or %matplotlib in the notebook to enable matplotlib.
- ServerApp.quit_buttonBool
Default:
True
If True, display controls to shut down the Jupyter server, such as menu items or buttons.
- ServerApp.rate_limit_windowFloat
Default:
0.0
DEPRECATED. Use ZMQChannelsWebsocketConnection.rate_limit_window
- ServerApp.reraise_server_extension_failuresBool
Default:
False
Reraise exceptions encountered loading server extensions?
- ServerApp.root_dirUnicode
Default:
''
The directory to use for notebooks and kernels.
- ServerApp.session_manager_classType
Default:
'builtins.object'
The session manager class to use.
- ServerApp.show_configBool
Default:
False
Instead of starting the Application, dump configuration to stdout
- ServerApp.show_config_jsonBool
Default:
False
Instead of starting the Application, dump configuration to stdout (as JSON)
- ServerApp.shutdown_no_activity_timeoutInt
Default:
0
Shut down the server after N seconds with no kernelsrunning and no activity. This can be used together with culling idle kernels (MappingKernelManager.cull_idle_timeout) to shutdown the Jupyter server when it’s not in use. This is not precisely timed: it may shut down up to a minute later. 0 (the default) disables this automatic shutdown.
- ServerApp.sockUnicode
Default:
''
The UNIX socket the Jupyter server will listen on.
- ServerApp.sock_modeUnicode
Default:
'0600'
The permissions mode for UNIX socket creation (default: 0600).
- ServerApp.ssl_optionsDict
Default:
{}
- Supply SSL options for the tornado HTTPServer.
See the tornado docs for details.
- ServerApp.static_immutable_cacheList
Default:
[]
Paths to set up static files as immutable.
This allow setting up the cache control of static files as immutable. It should be used for static file named with a hash for instance.
- ServerApp.terminado_settingsDict
Default:
{}
Supply overrides for terminado. Currently only supports “shell_command”.
- ServerApp.terminals_enabledBool
Default:
False
Set to False to disable terminals.
This does not make the server more secure by itself. Anything the user can in a terminal, they can also do in a notebook.
Terminals may also be automatically disabled if the terminado package is not available.
- ServerApp.tokenUnicode
Default:
'<DEPRECATED>'
DEPRECATED. Use IdentityProvider.token
- ServerApp.tornado_settingsDict
Default:
{}
Supply overrides for the tornado.web.Application that the Jupyter server uses.
- ServerApp.trust_xheadersBool
Default:
False
Whether to trust or not X-Scheme/X-Forwarded-Proto and X-Real-Ip/X-Forwarded-For headerssent by the upstream reverse proxy. Necessary if the proxy handles SSL
- ServerApp.use_redirect_fileBool
Default:
True
- Disable launching browser by redirect file
For versions of notebook > 5.7.2, a security feature measure was added that prevented the authentication token used to launch the browser from being visible. This feature makes it difficult for other users on a multi-user system from running code in your Jupyter session as you. However, some environments (like Windows Subsystem for Linux (WSL) and Chromebooks), launching a browser using a redirect file can lead the browser failing to load. This is because of the difference in file structures/paths between the runtime and the browser.
Disabling this setting to False will disable this behavior, allowing the browser to launch by using a URL and visible token (as before).
- ServerApp.webbrowser_open_newInt
Default:
2
- Specify where to open the server on startup. This is the
new
argument passed to the standard library methodwebbrowser.open
. The behaviour is not guaranteed, but depends on browser support. Valid values are:2 opens a new tab,
1 opens a new window,
0 opens in an existing window.
See the
webbrowser.open
documentation for details.
- ServerApp.websocket_compression_optionsAny
Default:
None
Set the tornado compression options for websocket connections.
This value will be returned from
WebSocketHandler.get_compression_options()
. None (default) will disable compression. A dict (even an empty one) will enable compression.See the tornado docs for WebSocketHandler.get_compression_options for details.
- ServerApp.websocket_ping_intervalInt
Default:
0
Configure the websocket ping interval in seconds.
Websockets are long-lived connections that are used by some Jupyter Server extensions.
Periodic pings help to detect disconnected clients and keep the connection active. If this is set to None, then no pings will be performed.
When a ping is sent, the client has
websocket_ping_timeout
seconds to respond. If no response is received within this period, the connection will be closed from the server side.- ServerApp.websocket_ping_timeoutInt
Default:
0
Configure the websocket ping timeout in seconds.
See
websocket_ping_interval
for details.- ServerApp.websocket_urlUnicode
Default:
''
- The base URL for websockets,
if it differs from the HTTP server (hint: it almost certainly doesn’t).
Should be in the form of an HTTP origin: ws[s]://hostname[:port]
- ConnectionFileMixin.connection_fileUnicode
Default:
''
JSON file in which to store connection info [default: kernel-<pid>.json]
This file will contain the IP, ports, and authentication key needed to connect clients to this kernel. By default, this file will be created in the security dir of the current profile, but can be specified by absolute path.
- ConnectionFileMixin.control_portInt
Default:
0
set the control (ROUTER) port [default: random]
- ConnectionFileMixin.hb_portInt
Default:
0
set the heartbeat port [default: random]
- ConnectionFileMixin.iopub_portInt
Default:
0
set the iopub (PUB) port [default: random]
- ConnectionFileMixin.ipUnicode
Default:
''
- Set the kernel’s IP address [default localhost].
If the IP address is something other than localhost, then Consoles on other machines will be able to connect to the Kernel, so be careful!
- ConnectionFileMixin.shell_portInt
Default:
0
set the shell (ROUTER) port [default: random]
- ConnectionFileMixin.stdin_portInt
Default:
0
set the stdin (ROUTER) port [default: random]
- ConnectionFileMixin.transportany of
'tcp'``|
’ipc’`` (case-insensitive) Default:
'tcp'
No description
- KernelManager.autorestartBool
Default:
True
Should we autorestart the kernel if it dies.
- KernelManager.cache_portsBool
Default:
False
True if the MultiKernelManager should cache ports for this KernelManager instance
- KernelManager.connection_fileUnicode
Default:
''
JSON file in which to store connection info [default: kernel-<pid>.json]
This file will contain the IP, ports, and authentication key needed to connect clients to this kernel. By default, this file will be created in the security dir of the current profile, but can be specified by absolute path.
- KernelManager.control_portInt
Default:
0
set the control (ROUTER) port [default: random]
- KernelManager.hb_portInt
Default:
0
set the heartbeat port [default: random]
- KernelManager.iopub_portInt
Default:
0
set the iopub (PUB) port [default: random]
- KernelManager.ipUnicode
Default:
''
- Set the kernel’s IP address [default localhost].
If the IP address is something other than localhost, then Consoles on other machines will be able to connect to the Kernel, so be careful!
- KernelManager.shell_portInt
Default:
0
set the shell (ROUTER) port [default: random]
- KernelManager.shutdown_wait_timeFloat
Default:
5.0
Time to wait for a kernel to terminate before killing it, in seconds. When a shutdown request is initiated, the kernel will be immediately sent an interrupt (SIGINT), followedby a shutdown_request message, after 1/2 of
shutdown_wait_time`it will be sent a terminate (SIGTERM) request, and finally at the end of `shutdown_wait_time
will be killed (SIGKILL). terminate and kill may be equivalent on windows. Note that this value can beoverridden by the in-use kernel provisioner since shutdown times mayvary by provisioned environment.- KernelManager.stdin_portInt
Default:
0
set the stdin (ROUTER) port [default: random]
- KernelManager.transportany of
'tcp'``|
’ipc’`` (case-insensitive) Default:
'tcp'
No description
- Session.buffer_thresholdInt
Default:
1024
Threshold (in bytes) beyond which an object’s buffer should be extracted to avoid pickling.
- Session.check_pidBool
Default:
True
Whether to check PID to protect against calls after fork.
This check can be disabled if fork-safety is handled elsewhere.
- Session.copy_thresholdInt
Default:
65536
Threshold (in bytes) beyond which a buffer should be sent without copying.
- Session.debugBool
Default:
False
Debug output in the Session
- Session.digest_history_sizeInt
Default:
65536
The maximum number of digests to remember.
The digest history will be culled when it exceeds this value.
- Session.item_thresholdInt
Default:
64
- The maximum number of items for a container to be introspected for custom serialization.
Containers larger than this are pickled outright.
- Session.keyCBytes
Default:
b''
execution key, for signing messages.
- Session.keyfileUnicode
Default:
''
path to file containing execution key.
- Session.metadataDict
Default:
{}
Metadata dictionary, which serves as the default top-level metadata dict for each message.
- Session.packerDottedObjectName
Default:
'json'
- The name of the packer for serializing messages.
Should be one of ‘json’, ‘pickle’, or an import name for a custom callable serializer.
- Session.sessionCUnicode
Default:
''
The UUID identifying this session.
- Session.signature_schemeUnicode
Default:
'hmac-sha256'
- The digest scheme used to construct the message signatures.
Must have the form ‘hmac-HASH’.
- Session.unpackerDottedObjectName
Default:
'json'
- The name of the unpacker for unserializing messages.
Only used with custom functions for
packer
.
- Session.usernameUnicode
Default:
'username'
Username for the Session. Default is your system username.
- MultiKernelManager.default_kernel_nameUnicode
Default:
'python3'
The name of the default kernel to start
- MultiKernelManager.kernel_manager_classDottedObjectName
Default:
'jupyter_client.ioloop.IOLoopKernelManager'
- The kernel manager class. This is configurable to allow
subclassing of the KernelManager for customized behavior.
- MultiKernelManager.shared_contextBool
Default:
True
Share a single zmq.Context to talk to all my kernels
- MappingKernelManager.allow_tracebacksBool
Default:
True
Whether to send tracebacks to clients on exceptions.
- MappingKernelManager.allowed_message_typesList
Default:
[]
- White list of allowed kernel message types.
When the list is empty, all message types are allowed.
- MappingKernelManager.buffer_offline_messagesBool
Default:
True
Whether messages from kernels whose frontends have disconnected should be buffered in-memory.
When True (default), messages are buffered and replayed on reconnect, avoiding lost messages due to interrupted connectivity.
Disable if long-running kernels will produce too much output while no frontends are connected.
- MappingKernelManager.cull_busyBool
Default:
False
- Whether to consider culling kernels which are busy.
Only effective if cull_idle_timeout > 0.
- MappingKernelManager.cull_connectedBool
Default:
False
- Whether to consider culling kernels which have one or more connections.
Only effective if cull_idle_timeout > 0.
- MappingKernelManager.cull_idle_timeoutInt
Default:
0
- Timeout (in seconds) after which a kernel is considered idle and ready to be culled.
Values of 0 or lower disable culling. Very short timeouts may result in kernels being culled for users with poor network connections.
- MappingKernelManager.cull_intervalInt
Default:
300
The interval (in seconds) on which to check for idle kernels exceeding the cull timeout value.
- MappingKernelManager.default_kernel_nameUnicode
Default:
'python3'
The name of the default kernel to start
- MappingKernelManager.kernel_info_timeoutFloat
Default:
60
Timeout for giving up on a kernel (in seconds).
On starting and restarting kernels, we check whether the kernel is running and responsive by sending kernel_info_requests. This sets the timeout in seconds for how long the kernel can take before being presumed dead. This affects the MappingKernelManager (which handles kernel restarts) and the ZMQChannelsHandler (which handles the startup).
- MappingKernelManager.kernel_manager_classDottedObjectName
Default:
'jupyter_client.ioloop.IOLoopKernelManager'
- The kernel manager class. This is configurable to allow
subclassing of the KernelManager for customized behavior.
- MappingKernelManager.root_dirUnicode
Default:
''
No description
- MappingKernelManager.shared_contextBool
Default:
True
Share a single zmq.Context to talk to all my kernels
- MappingKernelManager.traceback_replacement_messageUnicode
Default:
'An exception occurred at runtime, which is not shown due to ...
Message to print when allow_tracebacks is False, and an exception occurs
- MappingKernelManager.untracked_message_typesList
Default:
['comm_info_request', 'comm_info_reply', 'kernel_info_request...
List of kernel message types excluded from user activity tracking.
This should be a superset of the message types sent on any channel other than the shell channel.
- KernelSpecManager.allowed_kernelspecsSet
Default:
set()
List of allowed kernel names.
By default, all installed kernels are allowed.
- KernelSpecManager.ensure_native_kernelBool
Default:
True
- If there is no Python kernelspec registered and the IPython
kernel is available, ensure it is added to the spec list.
- KernelSpecManager.kernel_spec_classType
Default:
'jupyter_client.kernelspec.KernelSpec'
- The kernel spec class. This is configurable to allow
subclassing of the KernelSpecManager for customized behavior.
- KernelSpecManager.whitelistSet
Default:
set()
Deprecated, use
KernelSpecManager.allowed_kernelspecs
- AsyncMultiKernelManager.default_kernel_nameUnicode
Default:
'python3'
The name of the default kernel to start
- AsyncMultiKernelManager.kernel_manager_classDottedObjectName
Default:
'jupyter_client.ioloop.AsyncIOLoopKernelManager'
- The kernel manager class. This is configurable to allow
subclassing of the AsyncKernelManager for customized behavior.
- AsyncMultiKernelManager.shared_contextBool
Default:
True
Share a single zmq.Context to talk to all my kernels
- AsyncMultiKernelManager.use_pending_kernelsBool
Default:
False
- Whether to make kernels available before the process has started. The
kernel has a
.ready
future which can be awaited before connecting
- AsyncMappingKernelManager.allow_tracebacksBool
Default:
True
Whether to send tracebacks to clients on exceptions.
- AsyncMappingKernelManager.allowed_message_typesList
Default:
[]
- White list of allowed kernel message types.
When the list is empty, all message types are allowed.
- AsyncMappingKernelManager.buffer_offline_messagesBool
Default:
True
Whether messages from kernels whose frontends have disconnected should be buffered in-memory.
When True (default), messages are buffered and replayed on reconnect, avoiding lost messages due to interrupted connectivity.
Disable if long-running kernels will produce too much output while no frontends are connected.
- AsyncMappingKernelManager.cull_busyBool
Default:
False
- Whether to consider culling kernels which are busy.
Only effective if cull_idle_timeout > 0.
- AsyncMappingKernelManager.cull_connectedBool
Default:
False
- Whether to consider culling kernels which have one or more connections.
Only effective if cull_idle_timeout > 0.
- AsyncMappingKernelManager.cull_idle_timeoutInt
Default:
0
- Timeout (in seconds) after which a kernel is considered idle and ready to be culled.
Values of 0 or lower disable culling. Very short timeouts may result in kernels being culled for users with poor network connections.
- AsyncMappingKernelManager.cull_intervalInt
Default:
300
The interval (in seconds) on which to check for idle kernels exceeding the cull timeout value.
- AsyncMappingKernelManager.default_kernel_nameUnicode
Default:
'python3'
The name of the default kernel to start
- AsyncMappingKernelManager.kernel_info_timeoutFloat
Default:
60
Timeout for giving up on a kernel (in seconds).
On starting and restarting kernels, we check whether the kernel is running and responsive by sending kernel_info_requests. This sets the timeout in seconds for how long the kernel can take before being presumed dead. This affects the MappingKernelManager (which handles kernel restarts) and the ZMQChannelsHandler (which handles the startup).
- AsyncMappingKernelManager.kernel_manager_classDottedObjectName
Default:
'jupyter_client.ioloop.AsyncIOLoopKernelManager'
- The kernel manager class. This is configurable to allow
subclassing of the AsyncKernelManager for customized behavior.
- AsyncMappingKernelManager.root_dirUnicode
Default:
''
No description
- AsyncMappingKernelManager.shared_contextBool
Default:
True
Share a single zmq.Context to talk to all my kernels
- AsyncMappingKernelManager.traceback_replacement_messageUnicode
Default:
'An exception occurred at runtime, which is not shown due to ...
Message to print when allow_tracebacks is False, and an exception occurs
- AsyncMappingKernelManager.untracked_message_typesList
Default:
['comm_info_request', 'comm_info_reply', 'kernel_info_request...
List of kernel message types excluded from user activity tracking.
This should be a superset of the message types sent on any channel other than the shell channel.
- AsyncMappingKernelManager.use_pending_kernelsBool
Default:
False
- Whether to make kernels available before the process has started. The
kernel has a
.ready
future which can be awaited before connecting
- ContentsManager.allow_hiddenBool
Default:
False
Allow access to hidden files
- ContentsManager.checkpointsInstance
Default:
None
No description
- ContentsManager.checkpoints_classType
Default:
'jupyter_server.services.contents.checkpoints.Checkpoints'
No description
- ContentsManager.checkpoints_kwargsDict
Default:
{}
No description
- ContentsManager.event_loggerInstance
Default:
None
No description
- ContentsManager.files_handler_classType
Default:
'jupyter_server.files.handlers.FilesHandler'
handler class to use when serving raw file requests.
Default is a fallback that talks to the ContentsManager API, which may be inefficient, especially for large files.
Local files-based ContentsManagers can use a StaticFileHandler subclass, which will be much more efficient.
Access to these files should be Authenticated.
- ContentsManager.files_handler_paramsDict
Default:
{}
Extra parameters to pass to files_handler_class.
For example, StaticFileHandlers generally expect a
path
argument specifying the root directory from which to serve files.- ContentsManager.hide_globsList
Default:
['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*~']
Glob patterns to hide in file and directory listings.
- ContentsManager.post_save_hookAny
Default:
None
Python callable or importstring thereof
to be called on the path of a file just saved.
This can be used to process the file on disk, such as converting the notebook to a script or HTML via nbconvert.
It will be called as (all arguments passed by keyword):
hook(os_path=os_path, model=model, contents_manager=instance)
path: the filesystem path to the file just written
model: the model representing the file
contents_manager: this ContentsManager instance
- ContentsManager.pre_save_hookAny
Default:
None
Python callable or importstring thereof
To be called on a contents model prior to save.
This can be used to process the structure, such as removing notebook outputs or other side effects that should not be saved.
It will be called as (all arguments passed by keyword):
hook(path=path, model=model, contents_manager=self)
model: the model to be saved. Includes file contents. Modifying this dict will affect the file that is stored.
path: the API path of the save destination
contents_manager: this ContentsManager instance
- ContentsManager.preferred_dirUnicode
Default:
''
Preferred starting directory to use for notebooks. This is an API path (
/
separated, relative to root dir)- ContentsManager.root_dirUnicode
Default:
'/'
No description
- ContentsManager.untitled_directoryUnicode
Default:
'Untitled Folder'
The base name used when creating untitled directories.
- ContentsManager.untitled_fileUnicode
Default:
'untitled'
The base name used when creating untitled files.
- ContentsManager.untitled_notebookUnicode
Default:
'Untitled'
The base name used when creating untitled notebooks.
- FileManagerMixin.hash_algorithmany of
'sha1'``|
’sha384’|
’sha224’|
’md5-sha1’|
’sha3_384’|
’blake2b’|
’sha3_512’|
’sha512_224’|
’md5’|
’shake_256’|
’shake_128’|
’sha512_256’|
’sm3’|
’blake2s’|
’sha512’|
’sha3_256’|
’sha3_224’|
’sha256’`` Default:
'sha256'
Hash algorithm to use for file content, support by hashlib
- FileManagerMixin.use_atomic_writingBool
Default:
True
- By default notebooks are saved on disk on a temporary file and then if successfully written, it replaces the old ones.
This procedure, namely ‘atomic_writing’, causes some bugs on file system without operation order enforcement (like some networked fs). If set to False, the new notebook is written directly on the old one which could fail (eg: full filesystem or quota )
- FileContentsManager.allow_hiddenBool
Default:
False
Allow access to hidden files
- FileContentsManager.always_delete_dirBool
Default:
False
- If True, deleting a non-empty directory will always be allowed.
WARNING this may result in files being permanently removed; e.g. on Windows, if the data size is too big for the trash/recycle bin the directory will be permanently deleted. If False (default), the non-empty directory will be sent to the trash only if safe. And if
delete_to_trash
is True, the directory won’t be deleted.
- FileContentsManager.checkpointsInstance
Default:
None
No description
- FileContentsManager.checkpoints_classType
Default:
'jupyter_server.services.contents.checkpoints.Checkpoints'
No description
- FileContentsManager.checkpoints_kwargsDict
Default:
{}
No description
- FileContentsManager.delete_to_trashBool
Default:
True
- If True (default), deleting files will send them to the
platform’s trash/recycle bin, where they can be recovered. If False, deleting files really deletes them.
- FileContentsManager.event_loggerInstance
Default:
None
No description
- FileContentsManager.files_handler_classType
Default:
'jupyter_server.files.handlers.FilesHandler'
handler class to use when serving raw file requests.
Default is a fallback that talks to the ContentsManager API, which may be inefficient, especially for large files.
Local files-based ContentsManagers can use a StaticFileHandler subclass, which will be much more efficient.
Access to these files should be Authenticated.
- FileContentsManager.files_handler_paramsDict
Default:
{}
Extra parameters to pass to files_handler_class.
For example, StaticFileHandlers generally expect a
path
argument specifying the root directory from which to serve files.- FileContentsManager.hash_algorithmany of
'sha1'``|
’sha384’|
’sha224’|
’md5-sha1’|
’sha3_384’|
’blake2b’|
’sha3_512’|
’sha512_224’|
’md5’|
’shake_256’|
’shake_128’|
’sha512_256’|
’sm3’|
’blake2s’|
’sha512’|
’sha3_256’|
’sha3_224’|
’sha256’`` Default:
'sha256'
Hash algorithm to use for file content, support by hashlib
- FileContentsManager.hide_globsList
Default:
['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*~']
Glob patterns to hide in file and directory listings.
- FileContentsManager.max_copy_folder_size_mbInt
Default:
500
The max folder size that can be copied
- FileContentsManager.post_save_hookAny
Default:
None
Python callable or importstring thereof
to be called on the path of a file just saved.
This can be used to process the file on disk, such as converting the notebook to a script or HTML via nbconvert.
It will be called as (all arguments passed by keyword):
hook(os_path=os_path, model=model, contents_manager=instance)
path: the filesystem path to the file just written
model: the model representing the file
contents_manager: this ContentsManager instance
- FileContentsManager.pre_save_hookAny
Default:
None
Python callable or importstring thereof
To be called on a contents model prior to save.
This can be used to process the structure, such as removing notebook outputs or other side effects that should not be saved.
It will be called as (all arguments passed by keyword):
hook(path=path, model=model, contents_manager=self)
model: the model to be saved. Includes file contents. Modifying this dict will affect the file that is stored.
path: the API path of the save destination
contents_manager: this ContentsManager instance
- FileContentsManager.preferred_dirUnicode
Default:
''
Preferred starting directory to use for notebooks. This is an API path (
/
separated, relative to root dir)- FileContentsManager.root_dirUnicode
Default:
''
No description
- FileContentsManager.untitled_directoryUnicode
Default:
'Untitled Folder'
The base name used when creating untitled directories.
- FileContentsManager.untitled_fileUnicode
Default:
'untitled'
The base name used when creating untitled files.
- FileContentsManager.untitled_notebookUnicode
Default:
'Untitled'
The base name used when creating untitled notebooks.
- FileContentsManager.use_atomic_writingBool
Default:
True
- By default notebooks are saved on disk on a temporary file and then if successfully written, it replaces the old ones.
This procedure, namely ‘atomic_writing’, causes some bugs on file system without operation order enforcement (like some networked fs). If set to False, the new notebook is written directly on the old one which could fail (eg: full filesystem or quota )
- AsyncContentsManager.allow_hiddenBool
Default:
False
Allow access to hidden files
- AsyncContentsManager.checkpointsInstance
Default:
None
No description
- AsyncContentsManager.checkpoints_classType
Default:
'jupyter_server.services.contents.checkpoints.AsyncCheckpoints'
No description
- AsyncContentsManager.checkpoints_kwargsDict
Default:
{}
No description
- AsyncContentsManager.event_loggerInstance
Default:
None
No description
- AsyncContentsManager.files_handler_classType
Default:
'jupyter_server.files.handlers.FilesHandler'
handler class to use when serving raw file requests.
Default is a fallback that talks to the ContentsManager API, which may be inefficient, especially for large files.
Local files-based ContentsManagers can use a StaticFileHandler subclass, which will be much more efficient.
Access to these files should be Authenticated.
- AsyncContentsManager.files_handler_paramsDict
Default:
{}
Extra parameters to pass to files_handler_class.
For example, StaticFileHandlers generally expect a
path
argument specifying the root directory from which to serve files.- AsyncContentsManager.hide_globsList
Default:
['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*~']
Glob patterns to hide in file and directory listings.
- AsyncContentsManager.post_save_hookAny
Default:
None
Python callable or importstring thereof
to be called on the path of a file just saved.
This can be used to process the file on disk, such as converting the notebook to a script or HTML via nbconvert.
It will be called as (all arguments passed by keyword):
hook(os_path=os_path, model=model, contents_manager=instance)
path: the filesystem path to the file just written
model: the model representing the file
contents_manager: this ContentsManager instance
- AsyncContentsManager.pre_save_hookAny
Default:
None
Python callable or importstring thereof
To be called on a contents model prior to save.
This can be used to process the structure, such as removing notebook outputs or other side effects that should not be saved.
It will be called as (all arguments passed by keyword):
hook(path=path, model=model, contents_manager=self)
model: the model to be saved. Includes file contents. Modifying this dict will affect the file that is stored.
path: the API path of the save destination
contents_manager: this ContentsManager instance
- AsyncContentsManager.preferred_dirUnicode
Default:
''
Preferred starting directory to use for notebooks. This is an API path (
/
separated, relative to root dir)- AsyncContentsManager.root_dirUnicode
Default:
'/'
No description
- AsyncContentsManager.untitled_directoryUnicode
Default:
'Untitled Folder'
The base name used when creating untitled directories.
- AsyncContentsManager.untitled_fileUnicode
Default:
'untitled'
The base name used when creating untitled files.
- AsyncContentsManager.untitled_notebookUnicode
Default:
'Untitled'
The base name used when creating untitled notebooks.
- AsyncFileManagerMixin.hash_algorithmany of
'sha1'``|
’sha384’|
’sha224’|
’md5-sha1’|
’sha3_384’|
’blake2b’|
’sha3_512’|
’sha512_224’|
’md5’|
’shake_256’|
’shake_128’|
’sha512_256’|
’sm3’|
’blake2s’|
’sha512’|
’sha3_256’|
’sha3_224’|
’sha256’`` Default:
'sha256'
Hash algorithm to use for file content, support by hashlib
- AsyncFileManagerMixin.use_atomic_writingBool
Default:
True
- By default notebooks are saved on disk on a temporary file and then if successfully written, it replaces the old ones.
This procedure, namely ‘atomic_writing’, causes some bugs on file system without operation order enforcement (like some networked fs). If set to False, the new notebook is written directly on the old one which could fail (eg: full filesystem or quota )
- AsyncFileContentsManager.allow_hiddenBool
Default:
False
Allow access to hidden files
- AsyncFileContentsManager.always_delete_dirBool
Default:
False
- If True, deleting a non-empty directory will always be allowed.
WARNING this may result in files being permanently removed; e.g. on Windows, if the data size is too big for the trash/recycle bin the directory will be permanently deleted. If False (default), the non-empty directory will be sent to the trash only if safe. And if
delete_to_trash
is True, the directory won’t be deleted.
- AsyncFileContentsManager.checkpointsInstance
Default:
None
No description
- AsyncFileContentsManager.checkpoints_classType
Default:
'jupyter_server.services.contents.checkpoints.AsyncCheckpoints'
No description
- AsyncFileContentsManager.checkpoints_kwargsDict
Default:
{}
No description
- AsyncFileContentsManager.delete_to_trashBool
Default:
True
- If True (default), deleting files will send them to the
platform’s trash/recycle bin, where they can be recovered. If False, deleting files really deletes them.
- AsyncFileContentsManager.event_loggerInstance
Default:
None
No description
- AsyncFileContentsManager.files_handler_classType
Default:
'jupyter_server.files.handlers.FilesHandler'
handler class to use when serving raw file requests.
Default is a fallback that talks to the ContentsManager API, which may be inefficient, especially for large files.
Local files-based ContentsManagers can use a StaticFileHandler subclass, which will be much more efficient.
Access to these files should be Authenticated.
- AsyncFileContentsManager.files_handler_paramsDict
Default:
{}
Extra parameters to pass to files_handler_class.
For example, StaticFileHandlers generally expect a
path
argument specifying the root directory from which to serve files.- AsyncFileContentsManager.hash_algorithmany of
'sha1'``|
’sha384’|
’sha224’|
’md5-sha1’|
’sha3_384’|
’blake2b’|
’sha3_512’|
’sha512_224’|
’md5’|
’shake_256’|
’shake_128’|
’sha512_256’|
’sm3’|
’blake2s’|
’sha512’|
’sha3_256’|
’sha3_224’|
’sha256’`` Default:
'sha256'
Hash algorithm to use for file content, support by hashlib
- AsyncFileContentsManager.hide_globsList
Default:
['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*~']
Glob patterns to hide in file and directory listings.
- AsyncFileContentsManager.max_copy_folder_size_mbInt
Default:
500
The max folder size that can be copied
- AsyncFileContentsManager.post_save_hookAny
Default:
None
Python callable or importstring thereof
to be called on the path of a file just saved.
This can be used to process the file on disk, such as converting the notebook to a script or HTML via nbconvert.
It will be called as (all arguments passed by keyword):
hook(os_path=os_path, model=model, contents_manager=instance)
path: the filesystem path to the file just written
model: the model representing the file
contents_manager: this ContentsManager instance
- AsyncFileContentsManager.pre_save_hookAny
Default:
None
Python callable or importstring thereof
To be called on a contents model prior to save.
This can be used to process the structure, such as removing notebook outputs or other side effects that should not be saved.
It will be called as (all arguments passed by keyword):
hook(path=path, model=model, contents_manager=self)
model: the model to be saved. Includes file contents. Modifying this dict will affect the file that is stored.
path: the API path of the save destination
contents_manager: this ContentsManager instance
- AsyncFileContentsManager.preferred_dirUnicode
Default:
''
Preferred starting directory to use for notebooks. This is an API path (
/
separated, relative to root dir)- AsyncFileContentsManager.root_dirUnicode
Default:
''
No description
- AsyncFileContentsManager.untitled_directoryUnicode
Default:
'Untitled Folder'
The base name used when creating untitled directories.
- AsyncFileContentsManager.untitled_fileUnicode
Default:
'untitled'
The base name used when creating untitled files.
- AsyncFileContentsManager.untitled_notebookUnicode
Default:
'Untitled'
The base name used when creating untitled notebooks.
- AsyncFileContentsManager.use_atomic_writingBool
Default:
True
- By default notebooks are saved on disk on a temporary file and then if successfully written, it replaces the old ones.
This procedure, namely ‘atomic_writing’, causes some bugs on file system without operation order enforcement (like some networked fs). If set to False, the new notebook is written directly on the old one which could fail (eg: full filesystem or quota )
- NotebookNotary.algorithmany of
'sha1'``|
’sha384’|
’sha224’|
’md5’|
’sha512’|
’sha3_384’|
’blake2b’|
’sha3_256’|
’sha3_512’|
’blake2s’|
’sha3_224’|
’sha256’`` Default:
'sha256'
The hashing algorithm used to sign notebooks.
- NotebookNotary.data_dirUnicode
Default:
''
The storage directory for notary secret and database.
- NotebookNotary.db_fileUnicode
Default:
''
- The sqlite file in which to store notebook signatures.
By default, this will be in your Jupyter data directory. You can set it to ‘:memory:’ to disable sqlite writing to the filesystem.
- NotebookNotary.secretBytes
Default:
b''
The secret key with which notebooks are signed.
- NotebookNotary.secret_fileUnicode
Default:
''
The file where the secret key is stored.
- NotebookNotary.store_factoryCallable
Default:
traitlets.Undefined
- A callable returning the storage backend for notebook signatures.
The default uses an SQLite database.
- GatewayMappingKernelManager.allow_tracebacksBool
Default:
True
Whether to send tracebacks to clients on exceptions.
- GatewayMappingKernelManager.allowed_message_typesList
Default:
[]
- White list of allowed kernel message types.
When the list is empty, all message types are allowed.
- GatewayMappingKernelManager.buffer_offline_messagesBool
Default:
True
Whether messages from kernels whose frontends have disconnected should be buffered in-memory.
When True (default), messages are buffered and replayed on reconnect, avoiding lost messages due to interrupted connectivity.
Disable if long-running kernels will produce too much output while no frontends are connected.
- GatewayMappingKernelManager.cull_busyBool
Default:
False
- Whether to consider culling kernels which are busy.
Only effective if cull_idle_timeout > 0.
- GatewayMappingKernelManager.cull_connectedBool
Default:
False
- Whether to consider culling kernels which have one or more connections.
Only effective if cull_idle_timeout > 0.
- GatewayMappingKernelManager.cull_idle_timeoutInt
Default:
0
- Timeout (in seconds) after which a kernel is considered idle and ready to be culled.
Values of 0 or lower disable culling. Very short timeouts may result in kernels being culled for users with poor network connections.
- GatewayMappingKernelManager.cull_intervalInt
Default:
300
The interval (in seconds) on which to check for idle kernels exceeding the cull timeout value.
- GatewayMappingKernelManager.default_kernel_nameUnicode
Default:
'python3'
The name of the default kernel to start
- GatewayMappingKernelManager.kernel_info_timeoutFloat
Default:
60
Timeout for giving up on a kernel (in seconds).
On starting and restarting kernels, we check whether the kernel is running and responsive by sending kernel_info_requests. This sets the timeout in seconds for how long the kernel can take before being presumed dead. This affects the MappingKernelManager (which handles kernel restarts) and the ZMQChannelsHandler (which handles the startup).
- GatewayMappingKernelManager.kernel_manager_classDottedObjectName
Default:
'jupyter_client.ioloop.AsyncIOLoopKernelManager'
- The kernel manager class. This is configurable to allow
subclassing of the AsyncKernelManager for customized behavior.
- GatewayMappingKernelManager.root_dirUnicode
Default:
''
No description
- GatewayMappingKernelManager.shared_contextBool
Default:
True
Share a single zmq.Context to talk to all my kernels
- GatewayMappingKernelManager.traceback_replacement_messageUnicode
Default:
'An exception occurred at runtime, which is not shown due to ...
Message to print when allow_tracebacks is False, and an exception occurs
- GatewayMappingKernelManager.untracked_message_typesList
Default:
['comm_info_request', 'comm_info_reply', 'kernel_info_request...
List of kernel message types excluded from user activity tracking.
This should be a superset of the message types sent on any channel other than the shell channel.
- GatewayMappingKernelManager.use_pending_kernelsBool
Default:
False
- Whether to make kernels available before the process has started. The
kernel has a
.ready
future which can be awaited before connecting
- GatewayKernelSpecManager.allowed_kernelspecsSet
Default:
set()
List of allowed kernel names.
By default, all installed kernels are allowed.
- GatewayKernelSpecManager.ensure_native_kernelBool
Default:
True
- If there is no Python kernelspec registered and the IPython
kernel is available, ensure it is added to the spec list.
- GatewayKernelSpecManager.kernel_spec_classType
Default:
'jupyter_client.kernelspec.KernelSpec'
- The kernel spec class. This is configurable to allow
subclassing of the KernelSpecManager for customized behavior.
- GatewayKernelSpecManager.whitelistSet
Default:
set()
Deprecated, use
KernelSpecManager.allowed_kernelspecs
- SessionManager.database_filepathUnicode
Default:
':memory:'
The filesystem path to SQLite Database file (e.g. /path/to/session_database.db). By default, the session database is stored in-memory (i.e.
:memory:
setting from sqlite3) and does not persist when the current Jupyter Server shuts down.- GatewaySessionManager.database_filepathUnicode
Default:
':memory:'
The filesystem path to SQLite Database file (e.g. /path/to/session_database.db). By default, the session database is stored in-memory (i.e.
:memory:
setting from sqlite3) and does not persist when the current Jupyter Server shuts down.- BaseKernelWebsocketConnection.kernel_ws_protocolUnicode
Default:
None
Preferred kernel message protocol over websocket to use (default: None). If an empty string is passed, select the legacy protocol. If None, the selected protocol will depend on what the front-end supports (usually the most recent protocol supported by the back-end and the front-end).
- BaseKernelWebsocketConnection.sessionInstance
Default:
None
No description
- GatewayWebSocketConnection.kernel_ws_protocolUnicode
Default:
''
No description
- GatewayWebSocketConnection.sessionInstance
Default:
None
No description
- GatewayClient.accept_cookiesBool
Default:
False
- Accept and manage cookies sent by the service side. This is often useful
for load balancers to decide which backend node to use. (JUPYTER_GATEWAY_ACCEPT_COOKIES env var)
- GatewayClient.allowed_envsUnicode
Default:
''
A comma-separated list of environment variable names that will be included, along with their values, in the kernel startup request. The corresponding
client_envs
configuration value must also be set on the Gateway server - since that configuration value indicates which environmental values to make available to the kernel. (JUPYTER_GATEWAY_ALLOWED_ENVS env var)- GatewayClient.auth_header_keyUnicode
Default:
''
The authorization header’s key name (typically ‘Authorization’) used in the HTTP headers. The header will be formatted as:
{'{auth_header_key}': '{auth_scheme} {auth_token}'}
If the authorization header key takes a single value,
auth_scheme
should be set to None and ‘auth_token’ should be configured to use the appropriate value.(JUPYTER_GATEWAY_AUTH_HEADER_KEY env var)
- GatewayClient.auth_schemeUnicode
Default:
''
The auth scheme, added as a prefix to the authorization token used in the HTTP headers. (JUPYTER_GATEWAY_AUTH_SCHEME env var)
- GatewayClient.auth_tokenUnicode
Default:
None
The authorization token used in the HTTP headers. The header will be formatted as:
{'{auth_header_key}': '{auth_scheme} {auth_token}'}
(JUPYTER_GATEWAY_AUTH_TOKEN env var)
- GatewayClient.ca_certsUnicode
Default:
None
The filename of CA certificates or None to use defaults. (JUPYTER_GATEWAY_CA_CERTS env var)
- GatewayClient.client_certUnicode
Default:
None
The filename for client SSL certificate, if any. (JUPYTER_GATEWAY_CLIENT_CERT env var)
- GatewayClient.client_keyUnicode
Default:
None
The filename for client SSL key, if any. (JUPYTER_GATEWAY_CLIENT_KEY env var)
- GatewayClient.connect_timeoutFloat
Default:
40.0
The time allowed for HTTP connection establishment with the Gateway server. (JUPYTER_GATEWAY_CONNECT_TIMEOUT env var)
- GatewayClient.env_whitelistUnicode
Default:
''
Deprecated, use
GatewayClient.allowed_envs
- GatewayClient.event_loggerInstance
Default:
None
No description
- GatewayClient.gateway_retry_intervalFloat
Default:
1.0
The time allowed for HTTP reconnection with the Gateway server for the first time. Next will be JUPYTER_GATEWAY_RETRY_INTERVAL multiplied by two in factor of numbers of retries but less than JUPYTER_GATEWAY_RETRY_INTERVAL_MAX. (JUPYTER_GATEWAY_RETRY_INTERVAL env var)
- GatewayClient.gateway_retry_interval_maxFloat
Default:
30.0
The maximum time allowed for HTTP reconnection retry with the Gateway server. (JUPYTER_GATEWAY_RETRY_INTERVAL_MAX env var)
- GatewayClient.gateway_retry_maxInt
Default:
5
The maximum retries allowed for HTTP reconnection with the Gateway server. (JUPYTER_GATEWAY_RETRY_MAX env var)
- GatewayClient.gateway_token_renewer_classType
Default:
'jupyter_server.gateway.gateway_client.GatewayTokenRenewerBase'
The class to use for Gateway token renewal. (JUPYTER_GATEWAY_TOKEN_RENEWER_CLASS env var)
- GatewayClient.headersUnicode
Default:
'{}'
- Additional HTTP headers to pass on the request. This value will be converted to a dict.
(JUPYTER_GATEWAY_HEADERS env var)
- GatewayClient.http_pwdUnicode
Default:
None
The password for HTTP authentication. (JUPYTER_GATEWAY_HTTP_PWD env var)
- GatewayClient.http_userUnicode
Default:
None
The username for HTTP authentication. (JUPYTER_GATEWAY_HTTP_USER env var)
- GatewayClient.kernels_endpointUnicode
Default:
'/api/kernels'
The gateway API endpoint for accessing kernel resources (JUPYTER_GATEWAY_KERNELS_ENDPOINT env var)
- GatewayClient.kernelspecs_endpointUnicode
Default:
'/api/kernelspecs'
The gateway API endpoint for accessing kernelspecs (JUPYTER_GATEWAY_KERNELSPECS_ENDPOINT env var)
- GatewayClient.kernelspecs_resource_endpointUnicode
Default:
'/kernelspecs'
The gateway endpoint for accessing kernelspecs resources (JUPYTER_GATEWAY_KERNELSPECS_RESOURCE_ENDPOINT env var)
- GatewayClient.launch_timeout_padFloat
Default:
2.0
Timeout pad to be ensured between KERNEL_LAUNCH_TIMEOUT and request_timeout such that request_timeout >= KERNEL_LAUNCH_TIMEOUT + launch_timeout_pad. (JUPYTER_GATEWAY_LAUNCH_TIMEOUT_PAD env var)
- GatewayClient.request_timeoutFloat
Default:
42.0
The time allowed for HTTP request completion. (JUPYTER_GATEWAY_REQUEST_TIMEOUT env var)
- GatewayClient.urlUnicode
Default:
None
The url of the Kernel or Enterprise Gateway server where kernel specifications are defined and kernel management takes place. If defined, this Notebook server acts as a proxy for all kernel management and kernel specification retrieval. (JUPYTER_GATEWAY_URL env var)
- GatewayClient.validate_certBool
Default:
True
For HTTPS requests, determines if server’s certificate should be validated or not. (JUPYTER_GATEWAY_VALIDATE_CERT env var)
- GatewayClient.ws_urlUnicode
Default:
None
The websocket url of the Kernel or Enterprise Gateway server. If not provided, this value will correspond to the value of the Gateway url with ‘ws’ in place of ‘http’. (JUPYTER_GATEWAY_WS_URL env var)
- EventLogger.handlersHandlers
Default:
None
A list of logging.Handler instances to send events to.
When set to None (the default), all events are discarded.
- ZMQChannelsWebsocketConnection.iopub_data_rate_limitFloat
Default:
1000000
- (bytes/sec)
Maximum rate at which stream output can be sent on iopub before they are limited.
- ZMQChannelsWebsocketConnection.iopub_msg_rate_limitFloat
Default:
1000
- (msgs/sec)
Maximum rate at which messages can be sent on iopub before they are limited.
- ZMQChannelsWebsocketConnection.kernel_ws_protocolUnicode
Default:
None
Preferred kernel message protocol over websocket to use (default: None). If an empty string is passed, select the legacy protocol. If None, the selected protocol will depend on what the front-end supports (usually the most recent protocol supported by the back-end and the front-end).
- ZMQChannelsWebsocketConnection.limit_rateBool
Default:
True
Whether to limit the rate of IOPub messages (default: True). If True, use iopub_msg_rate_limit, iopub_data_rate_limit and/or rate_limit_window to tune the rate.
- ZMQChannelsWebsocketConnection.rate_limit_windowFloat
Default:
3
- (sec) Time window used to
check the message and data rate limits.
- ZMQChannelsWebsocketConnection.sessionInstance
Default:
None
No description